These days, clip on flip up sunglasses are the in thing because not only are they very stylish, but they are also very handy to use as compared to a real pair of sunglasses. The great thing about this type of thing is that one does not necessarily need to buy one because it is so easy to make one right at home. So if one would want to try making one, then here are some instructions how.
Now the very first thing to do would be to get a pair of old and cheap sunglasses and start taking the arms out with a screwdriver. By doing this, he will be left with just the two lenses of the pair of glasses. Make sure to be very careful with this part because the glasses will become quite fragile.
After that, find a hard paper clip that does not move easily when bended. The reason why one must find a hard paper clip wire is so that it will be steady enough to support itself when attached to the eyeglasses. So now when one finds such a wire, he has to make it straight using some pliers.
When the wire has been straightened, then one should get a pair of tough scissors and try to cut the wire into two. Then the next thing to do would be to get a wire and try to put it into the hole where the arms of the glasses was taken out. He must also do this for the other hole.
After the wires have been slotted in, then the next thing that one should do would be to actually tie the wires to the holes. The thing about this is that it is very hard to tie the wires by hand because these things are really tough. So in order to make a tight knot, one should use pliers to be able to tie the wire so that it will not be loose later on.
The next thing to do would be to take the two ends of the wiring and try to tie them together in the middle. Take note that the wire has to be attached to the frame of the glasses so that it cannot be seen. When the two ends have been brought to the middle, then try to tie them together.
The last thing to do here would be to make a small curve in the middle part so that it can be attached to the glasses. If there is already a small bend, then one should try clipping it on the eyeglasses to check if it looks good. If it looks fine, then one may now go out and start wearing it.
So basically, that is an easy way on how to make clip on flip up sunglasses. The great thing about making this at home is that it is cheaper than buying one outside. Also, it is more practical than an actual pair of sunglasses because it is smaller and it will not get spoiled easily.
Now the very first thing to do would be to get a pair of old and cheap sunglasses and start taking the arms out with a screwdriver. By doing this, he will be left with just the two lenses of the pair of glasses. Make sure to be very careful with this part because the glasses will become quite fragile.
After that, find a hard paper clip that does not move easily when bended. The reason why one must find a hard paper clip wire is so that it will be steady enough to support itself when attached to the eyeglasses. So now when one finds such a wire, he has to make it straight using some pliers.
When the wire has been straightened, then one should get a pair of tough scissors and try to cut the wire into two. Then the next thing to do would be to get a wire and try to put it into the hole where the arms of the glasses was taken out. He must also do this for the other hole.
After the wires have been slotted in, then the next thing that one should do would be to actually tie the wires to the holes. The thing about this is that it is very hard to tie the wires by hand because these things are really tough. So in order to make a tight knot, one should use pliers to be able to tie the wire so that it will not be loose later on.
The next thing to do would be to take the two ends of the wiring and try to tie them together in the middle. Take note that the wire has to be attached to the frame of the glasses so that it cannot be seen. When the two ends have been brought to the middle, then try to tie them together.
The last thing to do here would be to make a small curve in the middle part so that it can be attached to the glasses. If there is already a small bend, then one should try clipping it on the eyeglasses to check if it looks good. If it looks fine, then one may now go out and start wearing it.
So basically, that is an easy way on how to make clip on flip up sunglasses. The great thing about making this at home is that it is cheaper than buying one outside. Also, it is more practical than an actual pair of sunglasses because it is smaller and it will not get spoiled easily.
About the Author:
Check out www.brimzsports.com for a review of the benefits of purchasing clip on flip up sunglasses online, today. You can also view our selection of sunglasses at http://www.brimzsports.com now.
No comments:
Post a Comment